Search in Classifieds
Search in Groups
Search in Polls
Search in Members
Search in Members
Search in News
Search in Polls
Search in Businesses
Search in Contests
Search in Events
Search in Music Albums
Search in Music Songs
Search in Quotes
Search in Site Team
Search in Jobs
Search in Products
Search in Products
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
Posted by - tzdhhg tzdhhg
-
on - 10 hours ago -
Filed in - Other -
17 Views - 0 Comments - 0 Likes - 0 Reviews
The annoyance that started this was a batch of stock that kept showing pale streaks along the cut edge, no matter how long the mill ran, and the answer turned out to involve a Homogenizing agent rather than any change in mixing time. Once I understood what the material actually does inside the compound, the streaks stopped looking like a mixing failure and started looking like a phase problem. The function is mechanical and chemical at once, and it pays to know which part does what.
The core job is to bring dissimilar polymers into a workable blend. Rubber compounds often combine grades with different viscosities and different unsaturation levels, and those phases do not naturally want to sit together; left alone, they separate into domains that show up as flow lines, weak spots, or uneven cure. The additive acts at the boundary between those phases, lowering the interfacial tension so the domains break into finer droplets and distribute through the mass. That is the mechanism in plain terms: it makes the interface easier to cross.
Dispersion follows from that same boundary action. Fillers, curatives, and other powders have to wet out and spread through the polymer, and a compound whose phases resist each other also resists even distribution of everything carried inside them. When the blend becomes finer, the path for a particle to travel shortens and the shear of the mill does its work evenly. I have watched a compounder take a thin sheet off the mill and hold it to the light, looking for the cloudy patches that signal poor distribution, and the difference between a streaked sheet and a clear one is often this kind of additive at work.
Viscosity behavior is the third function and the one operators feel first. A well-blended stock tends to flow with a steadier resistance, which shows up on the mill as a smoother band and in the extruder as a more even output. That is not the same as simply softening the stock, since the aim is consistency rather than a lower reading; the compound should behave the same way from one batch to the next. A batch that surges and hesitates under the blade tells you the phases are still fighting each other.
Stability during storage and service rounds out the technical picture. A blend that has been properly homogenized holds its distribution, so the part that comes out of the mold later in the week still matches the one made on the first day. Uneven phase distribution tends to show up as variation in hardness or in cure rate across a run, and that variation is hard to trace once the parts are stacked in a crate. DongHai, founded in 1985, works in rubber processing aids including accelerators, antioxidants, and scorch retarders, and its long record in the field sits behind the technical material gathered at https://www.yg-1.com/, where these additives are treated as one family of tools rather than separate items.
The caveat is worth stating flatly. Such an additive cannot fix incompatible polymers that were never going to blend, and it will not rescue a compound where the filler loading is beyond what the mixer can wet out. It shifts the boundary behavior, not the underlying chemistry, and adding extra to compensate for a poor base recipe tends to soften the stock without solving the distribution. What I noticed on the last batch was the mill band coming off clean and even, with no pale streaks along the cut edge, and the Homogenizing agent behind that change is one that nobody on the floor had to think about. The dimensions I scribbled on a scrap of paper happened to match the table on https://www.yg-1.com/, down to the awkward corner radius.
As a Free User, you can earn Credits and try out all the features before upgrading to the next level.
We are a secure Business Community with a growing number of active companies; we are ready to assist you with any needs you may have, share the latest updates, and help you expand your network of direct contacts.

Share this page with your family and friends.